Predictive maintenance for chemicals and pharmaceuticals
In chemical and pharmaceutical production, equipment handles aggressive media, tight process parameters and validation requirements, so any unplanned stop means more than downtime: it puts a whole batch at risk or breaks the production protocol. Misoki lets you spot wear on a pump or compressor long before it affects the process.
Diagnostics that account for how sensitive the process is to deviations
In chemical production, process parameters such as pressure, temperature and reagent flow are often so tightly linked that even a small deviation in how a pump or compressor runs can affect product quality or process safety, and the equipment itself too. Pharmaceutical production adds the validated status of equipment: any abnormal stop needs a documented explanation for quality control.
Prism AI tracks the condition of rotating equipment independently of the process parameters and reports a developing defect in advance, while the intervention can still be planned without affecting the batch in production. A certified vibration analyst confirms significant findings, and together with the conclusion this builds a documented basis for planned repair: what both the production team and the quality team at the site need.
Misoki works on any rotating asset on your site
Here is what teams monitor most often:
- Chemically resistant pumps for reagent and product transfer
- Dosing pumps for precise process metering
- Process and inert-gas compressors
- Mixers and reactor agitators
- Vacuum pumps and vacuum-drying systems
- Fume-extraction and air-purification fans
- Centrifuges and process separators
- Granulation and tableting equipment drives (pharma)
- Pumps for process effluent and wash-water treatment
- Compressed-air compressors for cleanrooms
- Finished-product filling and packaging equipment drives
What the Prism AI assistant detects
- Mechanical seal wear on pumps handling aggressive and viscous media
- Cavitation in dosing and process pumps caused by changes in product properties
- Imbalance and misalignment of mixer drives and reactor agitators
- Electrical faults in drive motors (current and voltage analysis)
- Bearing wear in centrifuges and separators at high speeds
- Vacuum pump faults caused by contamination or rotor wear
- Corrosion of drive components exposed to aggressive vapours
- Vibration deviations in tableting and granulation equipment that affect product uniformity
- Thermal drift in drives running in continuous production cycles
What Misoki solves for your team
High cost of a lost batch
Equipment failure in the middle of a reaction or dosing cycle can mean writing off the entire product volume. Early warning gives time to remove the cause in advance.
Aggressive media shorten equipment life
Chemically active substances and vapours speed up wear on seals and bearings. We pick up this wear at an early stage.
Shutdowns must be documented and justified
Quality control needs a clear explanation for any deviation in how equipment runs. Every significant Prism finding is confirmed and documented.
Limited access to equipment in clean or restricted zones
Sanitary and safety rules make frequent physical inspections difficult. Remote monitoring reduces the need for frequent visits.
Processes depend closely on stable drives
Even a small deviation in a pump or mixer can show up in the quality of the final product. We track these deviations before they affect the batch.
Scattered condition data across production areas
Information is kept separately for each workshop or line. Misoki brings it together into one picture for the whole site.
Integration with your existing systems
In chemical and pharmaceutical production, the process control system (DCS/SCADA) already records reaction, pressure and flow parameters, and the quality team keeps its own deviation records. Misoki does not set up a separate, isolated loop for this: the platform matches its own equipment condition data with the same process parameters the DCS already tracks, which helps tell a real mechanical fault from a temporary deviation caused by the process itself.
Confirmed findings can be passed to the site's quality management system or CMMS as part of the documented justification for planned repair, with no extra paperwork. For sites that require validated systems and data residency, deployment on the site's own on-premises infrastructure is available.
How it works day to day.
A reliability engineer sees the condition of every pump, compressor or agitator alongside the current process parameters that piece of equipment serves, and immediately knows whether a vibration deviation is tied to the asset itself or to a temporary change in operating mode. When Prism flags a developing mechanical fault, the finding is worded so it can be used directly by the production team to plan a repair, and by quality assurance to document the case for a planned shutdown.
That removes the guesswork on the edge of "stop the equipment or run it a bit longer": the decision rests on a confirmed finding, not on an operator's judgment call under production-schedule pressure.
Minimise downtime. Keep operations running.
- Fewer lost product batches from a sudden pump, compressor or agitator failure
- Documented, expert-confirmed justification for every planned equipment shutdown
- Less impact of aggressive media on equipment life thanks to early detection of seal and bearing wear
- Clear distinction between a mechanical fault and a temporary process deviation
- One consolidated view of equipment condition across every workshop and line on site
- A long-term condition history to support modernisation decisions and quality-compliance requirements
See what Prism finds on your machines.
Send us a week of data from one machine and we walk you through the diagnosis.