Predictive maintenance for mining and metals
Crushers, mills and conveyor lines at mining and metals operations run continuously under dust, vibration and temperature loads that wear equipment out faster than in most other industries. Misoki helps you detect wear on an assembly before it stops the whole process chain.
Condition monitoring for a large fleet of similar equipment
At a mining and metals operation the question is rarely about one critical unit. The typical situation is dozens of similar machines (conveyor drives, pumps, fans), and the question is always which assembly is wearing fastest right now. Manual rounds on a fixed route simply can't cover everything in time.
The Prism AI system analyzes the data stream from the entire monitored fleet at once and ranks findings by severity, so the maintenance team always knows where to go first instead of following the calendar. This matters most where one faulty assembly on a crusher or conveyor can stop the whole processing line behind it. Misoki integrates with what is already installed on site, such as existing vibration-monitoring systems, SCADA and historical databases, and combines that data with its own measurements in one platform. Significant results are also confirmed by a certified vibration analyst (ISO CAT II/III), so the technical team receives a specific conclusion and a recommended action in place of a set of charts.
Misoki works on any rotating asset on your site
Here is what teams monitor most often:
- Primary, secondary and tertiary crushers
- Ball, rod, SAG and vertical mills
- Conveyor drive motors and gearboxes
- Slurry, process and dewatering pumps
- Plant and process air compressors
- Ventilation and cooling system fans
- Screen and vibrating-screen drives
- Rotary kiln drives and other rotating process equipment
- Thickener and agitator drives
- Stacker and material-transfer equipment
- Heavy-duty gearboxes and mill drive ring gears
What the Prism AI assistant detects
- Wear of the mill drive's ring gear and pinion
- Bearing defects on conveyor drives under sustained continuous load
- Imbalance and loose mounting on heavy rotating assemblies
- Misalignment on long conveyor drive lines
- Abrasive wear of fan blades and pump impellers from a dusty environment
- Electrical faults on high-power drive motors (current and voltage signature analysis)
- Resonant vibration in conveyor gallery steel structures
- Wear of crusher liners and wear plates, showing up as a shift in the vibration profile
- Lubrication breakdown in bearing assemblies under high dust and temperature conditions
What Misoki solves for your team
A large fleet of similar equipment
Checking hundreds of similar assemblies every day is physically impossible. Prism itself determines which one needs attention first.
A harsh environment for instruments
Dust, humidity and temperature swings disable ordinary measuring equipment. Our hardware is built for continuous operation in these conditions.
No redundancy for critical assemblies
A failed crusher or mill stops the whole process chain. Early detection gives you time for a planned intervention without stopping the process.
Sites far from centers of expertise
Not every mine or processing plant has a vibration analyst on staff. We provide that expertise remotely.
Secondary damage from emergency stops
The failure of one assembly often damages the ones next to it. Early detection lowers the risk of that cascade.
Justifying capital investment in modernization
A decision to replace heavy equipment needs a real history of its wear. We build up that data for objective analysis.
Integration with your existing systems
Mining and metallurgical plants rarely go without their own equipment-monitoring systems and protocols, a site typically already runs SCADA/DCS, a historian and point condition-monitoring systems installed on individual production areas at different times by different vendors.
Misoki doesn't displace that infrastructure, it builds into it: the platform reads data from the systems already in place and combines it with its own sensor network's readings into one condition picture, with no blind spots between old and new data sources.
Where a site already runs a CMMS or EAM system for maintenance requests, confirmed diagnostic findings can flow into it automatically, becoming the basis for a repair work order without manual data re-entry.
For mines, processing plants and other sites with strict information-security requirements or limited connectivity, on-premises and fully air-gapped deployment options are available.
How it works day to day.
Instead of waiting for a fixed inspection route to eventually reach every piece of equipment, the reliability team gets one priority-ranked view of the whole fleet, crushers, mills, conveyors, pumps, at once, in one place. Prism itself ranks findings by severity and urgency, so the team knows every day exactly which of dozens of similar units needs attention first, instead of spending time checking healthy assets on a fixed schedule. When a finding is complex or carries a high cost of being wrong, a certified vibration analyst confirms it as well, so the decision to shut down or repair a critical asset always rests on expert judgment, not on an algorithm alone.
Minimise downtime. Keep operations running.
- Fewer unplanned stops on crushers, mills and conveyor lines
- Coverage of the entire equipment fleet without growing the diagnostics team
- Clear prioritisation: the team always knows which of many similar units to check first
- Lower risk of secondary damage to adjacent equipment from emergency shutdowns
- A long-term wear history to support informed decisions on modernisation and equipment replacement
- Stable operation of the process chain even at sites without an in-house vibration analyst
See what Prism finds on your machines.
Send us a week of data from one machine and we walk you through the diagnosis.