Predictive maintenance for oil and gas
Oil and gas equipment runs at the limit of what it can do, often at remote and hazardous sites where an unnoticed fault threatens personnel safety as well as uptime. Misoki lets you see the condition of critical rotating equipment long before a failure.
Predict failures. Prevent downtime. Keep production moving.
In oil and gas, the decision to stop a unit or keep it running is often made under time pressure and with elevated risk to personnel. Misoki helps you move from planned preventive maintenance and reacting to failures that have already happened to condition-based maintenance, where decisions rest on actual readings instead of a calendar schedule.
Data from pumps, compressors and motors streams continuously to the cloud platform, where the Prism AI system recognizes a developing defect at a stage when the intervention can still be planned in advance. This matters most for equipment in hard-to-reach or hazardous areas, where every physical inspection takes time and carries risk. Misoki doesn't require you to replace what already works on site: the platform integrates with your existing monitoring systems (Bentley Nevada, SCADA, historical databases, third-party sensors). Every significant Prism finding is also confirmed by an internationally certified vibration analyst (ISO CAT II/III), so you receive a specific conclusion that is ready for action, with no mass of figures left to interpret.
Misoki works on any rotating asset on your site
Here is what teams monitor most often:
- Centrifugal and reciprocating pumps
- Screw, reciprocating and centrifugal compressors
- Electric motors and process-equipment drivetrains
- Generators and auxiliary rotating equipment
- Fans, blowers and cooling systems
- Pumping equipment at oil-transfer stations
- Rotating equipment on wells and artificial-lift systems
- Air-cooled heat exchanger fans
- Auxiliary drives on separators and process units
- Flare-gas and vapor-recovery compressors
What the Prism AI assistant detects
- Reciprocating compressor valve faults (leakage, wear, incomplete closure)
- Impeller damage and corrosion-wear signatures on pumps
- Bearing wear on wellsite and pumping equipment under continuous load
- Malfunctions of electric submersible pumps (ESPs) in artificial-lift systems
- Resonant vibration in piping valves and pumping stations
- Electrical faults on drive motors (current and voltage signature analysis)
- Fouling or clogging of impellers and flow passages that shifts the vibration profile
- Bearing overheating from lubrication breakdown in high ambient-temperature conditions
What Misoki solves for your team
Hazardous production areas
Physically inspecting equipment in explosion-hazard or hard-to-reach areas puts personnel at risk. Remote monitoring reduces the need for frequent site visits.
The cost of a stopped well or pumping station
Even a short stop in production or transport means direct financial losses. Early detection gives you time for a planned intervention.
Monitoring systems from different vendors spread across sites
Vibration, temperature and operating-mode data never come together into one picture. Misoki consolidates them regardless of the equipment manufacturer.
Not enough vibration-diagnostics expertise on site
Not every site has a certified analyst on staff. We take on that role through AI and a team of certified specialists.
Harsh operating conditions
High ambient temperatures, aggressive substances and vibration loads speed up wear. The system is adapted for monitoring in these conditions.
Decisions that need documented justification
Before stopping or replacing a critical assembly you need a clear, verified conclusion. Every significant Prism result is confirmed by a certified vibration analyst.
Integration with your existing systems
Many oil & gas facilities already run one or more condition-monitoring systems, SCADA/DCS platforms and historical inspection databases. Misoki is built to integrate with that existing infrastructure rather than requiring a full equipment replacement.
We can ingest data from existing vibration-monitoring systems, historical databases and third-party sensors, combining it with our own wireless sensors in one diagnostic environment.
Where a site's information-security policy requires it, especially for critical infrastructure or equipment operating in hazardous areas, Misoki supports on-premises and fully air-gapped deployment, so operational data never has to leave the plant network.
Confirmed diagnostic findings can also flow into existing work-order and maintenance-management systems.
How it works day to day.
Operations and reliability teams get continuous remote visibility into the condition of equipment that can be physically hard to reach or unsafe to inspect in person on a frequent basis.
When Prism AI detects signs of a developing fault, a certified analyst reviews the finding, confirms the root cause and provides clear recommendations for next steps.
That gives operations teams the confidence to schedule an intervention during a controlled window, rather than reacting to an equipment failure that has already occurred.
Minimise downtime. Keep operations running.
- Early warning specifically on the equipment where a failure directly threatens personnel safety and the continuity of production or transport
- Fewer trips to hazardous or remote sites for routine inspections
- Faster, more accurate fault identification on pumps, compressors and wellsite equipment
- Documented findings, confirmed by a certified vibration analyst, to support decisions on shutdown or repair
- One consolidated view of equipment condition, regardless of how many monitoring systems are already installed on site
- A shift from reacting to failures to maintaining equipment based on its actual condition
See what Prism finds on your machines.
Send us a week of data from one machine and we walk you through the diagnosis.