Predictive maintenance for maritime transport and port infrastructure
A ship's main engine, a fuel separator or port crane machinery run in an environment where an unthinkably fast stop means more than a repair, it means a missed sailing, a berth held up, or delayed cargo handling. A large share of this equipment also operates where there's no stable internet, and a steel hull jams the signal on its own, so the usual cloud monitoring tools simply don't work here the way they do on land. Misoki is built for that reality: the platform lets you see an engine, separator or crane mechanism wearing down well in advance, whether or not there's a shore connection right now.
Diagnostics that do not depend on having internet on board
On a ship or in a port, equipment cannot always be stopped for a check: the voyage goes on, cargo operations run on schedule, and there is simply no way to call in a specialist right away, especially at sea. At the same time, some shipboard equipment, in particular fuel and lube oil separators, has traditionally been a "grey zone" for the engineer: it is technically hard to see exactly whether impurities have been fully removed from the fuel at a given moment, and decisions about separator condition often rest more on experience than on objective data.
Prism AI removes this uncertainty by analysing the vibration and operating profile of the separator and other rotating equipment directly on site, instead of guessing. Since there is not always a stable connection to shore on board, and the hull blocks radio signals, Misoki deploys its own local network on board or within the port that links all sensors together, whether or not external internet is available. Prism's analysis and findings are available to the engineer locally on the ship's computer, even on the open sea with no connection, and the system keeps signalling a developing fault to prevent equipment failure before a connection to send data ashore becomes available. More on ship machinery condition monitoring and fuel oil separator monitoring.
Misoki works on any rotating asset on your site
Here is what teams monitor most often:
- Main ship engines and their auxiliary systems
- Auxiliary generators and diesel generator sets
- Fuel and lube oil separators
- Cooling system pumps and ballast pumps
- Ship compressed air compressors
- Fuel and lube oil system pumps
- Steering gear and thruster drives
- Propulsion systems and shaft line gearboxes
- Port cranes and lifting equipment
- Container handler and gantry crane drives
- Ballast and bilge pump stations
- Engine room ventilation systems
What the Prism AI assistant detects
- Insufficient fuel and lube oil purification in separators
- Early-stage bearing wear in main engines and generators
- Shaft line imbalance
- Cavitation in cooling system pumps and ballast pumps
- Electrical faults in generators
- Loose equipment mounting caused by hull vibration
- Bearing wear in port cranes under cyclic loads
- Steering gear resonance
- Abnormal thermal drift in the engine room
What Misoki solves for your team
No stable internet on board
On the open sea, and often even in port, there is no stable connection to shore, while cloud monitoring solutions need a constant connection to work.
A steel hull blocks the signal
The ship's metal hull jams radio signals on its own, so an ordinary wireless network designed for use on land works unreliably inside a ship.
Separator performance is invisible
It is technically hard to tell exactly whether impurities have been fully removed from fuel and lube oil at a given moment, so decisions often rest on experience instead of objective data.
The engineer needs an immediate alert
On board, waiting for a shore connection to learn about a fault is out of the question: the engineer must get Prism's finding at once, right on site.
A voyage cannot be interrupted
A ship cannot stop mid-voyage for an unplanned equipment check, so faults have to be found long before arrival in port.
Continuous cyclic loads in port
Port lifting equipment works in a constant loading and unloading cycle, which speeds up wear on bearings and mechanisms.
Integration with your existing systems
Misoki integrates with existing shipboard engine monitoring equipment, PLCs and engine room SCADA systems: their data is combined with readings from Misoki's own sensors in one diagnostic model, with no need to replace what is already installed and certified on board.
Since a stable connection to shore is not guaranteed, Misoki deploys a local sensor network on board or in port that runs fully autonomously: Prism's analysis runs on the ship's computer whether or not internet is available, and as soon as a shore connection appears, data and findings sync automatically with the cloud platform.
How it works day to day.
The mechanic gets Prism's analysis in real time directly on the ship's computer, without waiting for a shore connection: every asset is colour-coded by condition, and anything marked yellow or red comes with a written explanation from the AI diagnostician, the probable fault, how serious it is and the recommended next step, confirmed by a certified analyst.
As soon as the ship reaches port or a shore connection becomes available, the accumulated data and findings sync automatically to the cloud platform, so the shore-based technical team sees the full picture of equipment condition without any manual data transfer.
Minimise downtime. Keep operations running.
- Early warning of a fault before arriving in port, while there's still time to prepare the repair
- Objective quality control of fuel and lube oil purification in separators instead of judgment calls based on experience
- Continuous equipment protection at sea regardless of shore connectivity
- Fewer costly unplanned stops mid-voyage
- One view of equipment condition that syncs automatically to shore
- Long-term asset history for dry-dock repair planning
See what Prism finds on your machines.
Send us a week of data from one machine and we walk you through the diagnosis.