Predictive maintenance for production lines
Most line stops don't begin with a machine failing, they begin with a bearing that runs slightly louder than it did last week. Misoki brings vibration, current, ultrasound and acoustic data together through Prism AI, so your team sees the fault while it is still cheap to fix. More on software that reduces manufacturing downtime.
Turn data from your equipment into a decision before the breakdown
Manufacturing plants run dozens, sometimes hundreds, of rotating assets in sequence, where one failing bearing on one machine can stop the whole line behind it. Most of these failures don't arrive without warning: they build up gradually inside bearings, couplings and windings, and show up as small, measurable changes in vibration, temperature and electrical signature long before anything becomes visible or audible.
Misoki gives manufacturing teams continuous visibility of that early-warning signal across the whole plant. Wireless sensors and our own gateway stream condition data to the cloud, where Prism, our AI assistant, reviews it around the clock. Instead of a chart your team has to interpret, they get a plain conclusion: what is developing, how urgent it is and what to do next, with certified vibration analysts standing behind every important finding. And if you already run your own alerting and data-collection systems, we can integrate them with Misoki quickly, without disturbing the production process. More on reducing downtime in manufacturing.
Misoki works on any rotating asset in your plant
Here's what manufacturing teams monitor most often:
- Electric motors (AC induction, synchronous, servo drives)
- Centrifugal and positive-displacement pumps
- Compressors (screw, reciprocating, centrifugal)
- Gearboxes, speed increasers and transmissions
- Fans, blowers and exhaust ventilation systems
- Conveyor drive motors and geared drives
- CNC spindles and machining-centre drive systems
- Robotic manipulator joints and servo drives
- Rotating equipment in cooling and chiller plants
- Hydraulic power units
- Plant air compressors and auxiliary equipment
- Line-shaft and belt mechanical transmissions
What the Prism AI assistant detects
- Rolling-element bearing defects at an early stage (inner race, outer race, rolling elements, cage)
- Misalignment of coupled shafts
- Static and dynamic imbalance
- Mechanical looseness and structural resonance
- Gear-mesh wear and tooth damage
- Electrical motor faults: broken rotor bars, stator winding defects, eccentricity
- Cavitation and flow-induced vibration in pumps
- Lubrication degradation and abnormal friction signatures
- Abnormal temperature rise in drives, bearings and windings
What Misoki solves for manufacturing teams
Lines with no spare time
Production lines with a minimal time buffer, where any equipment stop cascades into idling further down the process.
More assets than routes cover
Maintenance teams responsible for far more equipment than they can physically inspect during scheduled route checks.
Anomalies that stay invisible
Vibration and temperature anomalies that go unnoticed until they reach a critical level.
Too many alarms, no priority
The difficulty of deciding which of many alarms actually needs attention first.
Raw data, no conclusion
Legacy monitoring systems that deliver raw data only, without a finished conclusion or recommendation.
Condition data in silos
Disconnected asset data: vibration results in one system, repair requests in another, with no single view of asset health.
Integration with your existing systems
Misoki is built to run on top of what you already have, not to replace it. If your plant already uses SCADA, DCS or vibration-monitoring hardware from another vendor, Misoki can process that data alongside our own sensors, or without them, giving you one consolidated diagnostic layer for checking the health of your equipment. See condition monitoring for manufacturing plants: the features to check.
Confirmed findings can be routed automatically into your existing CMMS or EAM as work orders, so nothing has to be re-entered by hand or tracked in a spreadsheet. For sites with strict IT/OT security policies, on-premise or fully isolated deployment keeps all data inside your own network.
How it works day to day.
The Misoki Prism AI assistant watches the condition-monitoring dashboard 24/7 and sees every monitored asset, so no change in its state is missed. In the alerting view, every asset is colour-coded by condition.
Anything marked yellow or red comes with a written explanation from the AI diagnostician: the probable fault, how serious it is and the recommended next step. Those findings are also reviewed by a certified analyst, who adds the context that makes the detected defect as useful as possible for the production team.
From there it works like an ordinary work order: scheduled, assigned and completed in whatever system your team already uses.
Minimise downtime. Maximise production continuity.
- Fewer unplanned stops on production-critical lines
- Maintenance planned around the real condition of the equipment rather than a fixed calendar
- Faster root-cause identification, because the fault type is known before the technician arrives
- Lower repair costs, thanks to catching defects while they are still cheap to correct
- One source of truth for asset condition, visible from the shop floor to the plant manager's office
See what Prism finds on your machines.
Send us a week of data from one machine and we walk you through the diagnosis.