Predictive maintenance for pulp and paper
A paper machine is made up of dozens of rolls, bearing housings and drives running in sync at high speed, and the failure of one assembly stops the entire continuous process, from the digester to the reel of the finished roll, along with the section where it happened. Misoki lets you spot a developing defect early, while there is still time to intervene without stopping the machine.
Diagnostics for a process that can't be stopped in part
In pulp and paper production, equipment is linked into one unbroken process chain: cooking, refining, sheet forming, pressing, drying, calendering. When one roll or drive stops, the whole line stops with it, and the longer the machine stands, the more expensive the restart becomes and the higher the chance of off-spec sheet at start-up.
The Prism AI system continuously monitors the condition of bearing housings, drives and rollers along the full length of the machine and recognizes deviations at a stage when you can still choose the moment to intervene, for example during a planned wire or press-roll change, instead of in the middle of producing a roll. Significant findings are confirmed by a certified vibration analyst, so the maintenance department receives a specific conclusion about exactly which assembly needs attention and how urgently.
Misoki works on any rotating asset on your site
Here is what teams monitor most often:
- Refining equipment drives (refiners, disc mills)
- Pulp stock and white-water transfer pumps
- Exhaust and drying system fans
- Wire, press and dryer section drives of the paper machine
- Roll bearings of calenders and the winder
- Digester and washing equipment drives
- Plant and process air compressors
- Press-section vacuum pumps
- Wood-handling equipment drives (chippers, debarkers)
- Stock-preparation mixers and agitators
- Gearboxes and couplings of the machine's drive lines
What the Prism AI assistant detects
- Wear of bearing housings in the wire and press sections of the machine
- Imbalance of calender and reel rolls caused by uneven sheet loading
- Misalignment of refiner drive lines
- Cavitation in stock pumps caused by fluctuating consistency
- Electrical faults in drive motors (current and voltage analysis)
- Resonant vibration of long roll structures at operating speed
- Wear of press-section vacuum pumps caused by abrasive particles in the stock
- Lubrication problems in bearing assemblies in high-humidity, steam-filled conditions
- Vibration deviations caused by worn knives on chippers and debarkers
What Misoki solves for your team
The cost of stopping the whole machine
Even a local fault stops the entire continuous process. Early detection gives you time to intervene without a full stop.
Humidity and steam around the equipment
Typical machine-hall conditions make it hard for ordinary measuring equipment to work. Our solutions are adapted to these conditions.
A long and expensive restart
After an unplanned stop, getting the machine running again and bringing the sheet back to quality takes hours. Fewer emergency stops mean fewer of these losses.
Abrasive stock and fillers
They speed up wear of pumps, seals and impellers. We track this wear at an early stage.
Finding which of dozens of rolls is the problem
The machine has many similar bearing housings along its full length. Prism points to the specific assembly, instead of the section as a whole.
Limited vibration-diagnostics expertise on site
Not every mill has a certified analyst on staff to assess complex cases quickly. Our team takes on that role.
Integration with your existing systems
At a large pulp and paper mill, equipment condition is usually already tracked in part: by separate process-control systems, by spot vibration meters on the most critical bearing housings, or by the records of the latest scheduled inspections. The problem is that this data is scattered across different places and rarely comes together into one picture for a specific machine, while there is no shortage of the data itself.
Misoki takes these scattered sources (readings from existing instruments, process-control data, the history of past inspections) and combines them with its own measurements into one condition profile for every roll and drive. If the mill already uses a CMMS or EAM system to plan repairs, the result goes into it as a specific work order. Deployment on the mill's local infrastructure (on-premises) is available if needed.
How it works day to day.
A shift supervisor or mechanic doesn't walk the machine to check each bearing housing in turn, instead they see a list of every monitored asset at once, ranked by how urgently each one needs attention. When Prism flags a growing defect on one of the press- or wire-section rolls, the finding states exactly which asset it is, the probable cause, and roughly how much time is left before it reaches a critical stage.
That makes it possible to schedule the repair around the next process shutdown, a wire or press-roll change, for example, instead of stopping the machine separately for one component or waiting for the defect to show up as a break in the sheet.
Minimise downtime. Keep operations running.
- Fewer unplanned machine stops from hidden bearing and drive wear
- Less time and sheet lost to restarts after unplanned downtime
- Precise identification of the problem asset among dozens of similar bearings along the machine
- The ability to tie critical-component repairs to already-scheduled process shutdowns
- One consolidated view of equipment condition instead of scattered point measurements
- A long-term wear history to plan modernisation of the machine fleet
See what Prism finds on your machines.
Send us a week of data from one machine and we walk you through the diagnosis.